Rolling 7th Consecutive days with Day Cut

Hours worked in excess of 8 on a 7^th consecutive day are paid at time and a half. The 7 consecutive days are based on a rolling period and can therefore cross pay weeks. The reset criteria may vary. In some cases the rule is reset after the 7^th consecutive day, in other cases it can continue until a break occurs.

In this scenario day cut is midnight. The workweek Is Saturday – Friday.

Demonstrate the following scenario. Display the capability of configuring the reset criteria to:

1-      Reset the counter after the 7^th consecutive day

2-      Reset when a break occurs. Display the parameters to define the break