Versions Compared

Old Version 3

changes.mady.by.user Julie Leake (Unlicensed)

Saved on

compared with

New Version 4

changes.mady.by.user Julie Leake (Unlicensed)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

ShiftAllows you to determine which shift you wish to associate with the Standard.
KBIAllows you to determine which KBI you wish to associate with the Standard.
From Volume/To Volume

Denotes the volume range of the standard.

  • Enter 1 in the From Volume field and up to 99999 in the To Volume field, to specify the range. If you don't care about the range, you can specify 0 in the From field and some large number that is bigger than the biggest number the KBI will ever have, in the To field. For example, you use the KBI for Total Rooms. You know that you will never have more than 500 rooms, so you would enter 1 in the From Volume field and 500 in the To Volume field.
  • Note that if you use a KBI based on the number of rooms, and the time required to perform the variable work increases or decreases with higher volume, you should create and specify additional ranges. Conceivably you can have multiple ranges for each KBI. Be careful to make the top end of the range anumber that is higher than you could ever encounter. In the previous example, if you set the range as 1-500 and then enter 501 rooms (because a room was sold twice in one day), LMS will ignore the 501 and return a 0 standard.
Days of the WeekAllows you to set separate Volumes for each day of the week. A graphical representation of the values is displayed for each day.

 


Configuring Spread Standards

 

To configure spread standardsAdd a Spread Standard:

 

  1. Select Labor Structure from the System Setup menu.
  2. Select the job that you want to configure.
  3. Click the Standards tabClick the green plus icon at the bottom of the screen.
  4. Select a Standard Set Shift and KBI from the drop-down list, if you wish to use a Standard Set other than the one selected.
  5. Click the Add KBI button to display the Add KBI dialog box.
  6. Select the KBI that you want to attach to the job from the KBI list.
  7. Select Spread SP.
  8. Click Add.
  9. Click Close.
  10. Click the tab for the shift you wish to configure standards.
  11. Click the Add Ranges icon.
  12. Enter the From Volume/To Volume data in the dialog boxmenus.
  13. Enter a From Volume and To Volume.
  14. Enter an amount for each time/day you wish to define the Spread.
  15. Click OK.

To Add Ranges:

Image Added

 

  1. Click the Add Range icon at the bottom of the screen if you wish to add more ranges.
  2. Click the Add Range button.
  3. Enter a From Volume and To Volume.
  4. Click OK.

Assignments Tab

To edit Assignments:

  1. Select the appropriate Employee. Assignments the employee is currently authorized to work, are displayed.
  2. Select or de-select Make Infinite. If de-selected, enter a To Volume.
  3. Enter the values in the appropriate day and time slots.
  4. Click OKActive next to the appropriate Assignment.

Image Added

 

To add new Assignments to the employee:

  1. Select the appropriate Employee.
  2. Click the Add button.
  3. Select the Assignment you wish to add.
  4. Select the appropriate Rank from the drop-down.
  5. Click Add.