UniFocus 
Image Added
DAYScope is the ability to scan comment cards for reporting directly from the property
DAYScope Scanning Instructions
DAYScope
|
 Image Modified
|
1. To begin double-click the
DAYScope icon on your desktop
2. Choose the Project
3. Then click "Scan Cards"
|
 Image Modified
|
1. Set the Date Range
2. Click "OK" after making the
changes.
|  Image Modified
 Image Modified
|
1. Verify correct settings
2. Then click "OK"
|
 Image Modified
|
1. Inspect surveys.
2. Align all cards so they are going
in the same direction.
3. Place cards in document feeder
face down with the UniFocus 9-
digit ID# facing down and at the
top rightas you face the scanner,
i.e. head first, face down.
|
 Image Modified
 Image Modified
|
1. The Scanner Settings window will
be open before you scan.
2. This will allow you to check the
settings each time before you
scan cards.
Note: This screen may look different if you are not using the Fujitsu scanner.
|
 Image Modified
|
After all setting are verified, click the "Scan" button.
|
 Image Modified
|
If you have more cards to scan, load the additional cards and click "Yes"
Click "No" when finished scanning.
|
 Image Modified
|
When scanning is complete, you will see a window with thumbnail images of the cards scanned.
Double-click on any image to check image quality prior to transmitting to UniFocus.
|
 Image Modified
 Image Modified
|
When you double-click a thumbnail image to check on scanning success, an image properties window will appear and indicate if the scan was correct.
|
 Image Modified
|
If bad images have been scanned, they can be deleted before uploading the images to UniFocus.
Highlight the image, click on "Images are BAD, delete & re-scan."
Then click "Yes" to confirm.
|  Image Modified Image Modified
|
When images are ready to be uploaded to UniFocus, click on "Images are OK, send to UniFocus"
Then click "Yes" in the Confirmation window.
|
 Image Modified
 Image Modified
|
Click "OK" when you are connected to the Internet, so that the upload can be completed.
Then click "OK" to complete the process.
|  Image Modified
 Image Modified
|
