Anchor
property-data-rounding
property-data-rounding
Property Data Rounding

Description	Use the values set in the property data table to round the punches.
Parameters	Parameter	Description
	Clock BACK	Rounds the Back punches from the time clock.
	Clock BREAK	Rounds the Break punches from the time clock.
	Clock IN	Rounds the In punches from the time clock.
	Clock OUT	Rounds the Out punches from the time clock.
	Manual BACK	Rounds the Back punches that were created by users.
	Manual BREAK	Rounds the Break punches that were created by users.
	Manual IN	Rounds the In punches that were created by users.
	Manual OUT	Rounds the Out punches that were created by users.

Anchor
minute-rounding
minute-rounding
Minute Rounding

Description	Rounds time based on the punch type and the configured Round To minutes.
Parameters	Parameter	Description
	BACK Round To	Rounds Back punches to the nearest X minutes.
	BREAK Round To	Rounds Break punches to the nearest X minutes.
	Clock BACK	Rounds Back punches from the time clock.
	Clock BREAK	Rounds the Break punches from the time clock.
	Clock IN	Rounds In punches from the time clock.
	Clock OUT	Rounds Out punches from the time clock.
	IN Round To	Rounds In punches to the closest X minute.
	Manual BACK	Rounds Back punches that were created by users.
	Manual BREAK	Rounds Break punches that were created by users.
	Manual IN	Rounds In punches that were created by users.
	Manual OUT	Rounds Out punches that were created by users.
	OUT Round To	Rounds Out punches to the nearest X minutes.

Description

Round the Out punch time based on hours worked and the configured Round To minutes.

Info

icon	false

Note: This rule cannot be combined with other rounding rules.

Parameters

Parameter

Description

Round To

Round to the nearest x minutes

Description	Rounds time based on punch type and configured Round To minutes.
Parameters	Parameter	Description
	Clock IN	Round In punches from time clock.
	Grace Post Schedule Start	Grace period, after the start of the schedule, in which rounding begins.
	Grace Pre Schedule Start	Grace period, before the start of the schedule, in which rounding begins.
	Manual IN	Round In punches that were created by users.
	Round Time To	Rounds punches to the closest designated minute.
	Rounding Options	Select the method to use for rounding punches. Options include: Nearest - The punch is rounded to the nearest designated minute. Up - The punch is rounded up to the next minute. Down - The punch is rounded down to the previous minute. None - The punch is not rounded.
	Verify Job	Rounds the punch only if the job matches the scheduled job.

Description	Rounds time based on punch type and configured Round To minutes.
Parameters	Parameter	Description
	Clock OUT	Round Out punches from time clock.
	Grace Post Schedule End	Grace period, after to the end of the schedule, that will be rounded to match the scheduled shift.
	Grace Pre Schedule End	Grace period, before to the end of the schedule, that will be rounded to match the scheduled shift.
	Manual OUT	Round Out punches that were created by users.
	Round Time To	Round time to the nearest x minutes.
	Rounding Options	Select the method to use for rounding punches. Options include: Nearest - The punch is rounded to the nearest designated minute. Up - The punch is rounded up to the next minute. Down - The punch is rounded down to the previous minute. None - The punch is not rounded.

Description	Configure grace periods on Back from break punches so that Back punches are rounded to the break threshold length if they fall within the grace period.
Tips	This rule is helpful in locations where there are long lines at the Time Clocks. If the work rule is applied, employees only get charged for the break time taken and not the time they spent waiting in line at the Time Clock.
Parameters	Parameter	Description
	Break Length	Break length (in minutes) to round to if the break time falls within the grace period parameter.
	Grace Period	If break length falls within +/- grace period (in minutes), the back punch will be rounded to make the break length equal to the configured break length parameter.